Tag
projects
11 entries · RSS ↗
Modifying Welding Pedal for a Miller 6-Pin Connector (ArcCaptain Pedal)
I bought a Miller 161 STH welder which has a little hand remote control included, and found it was more difficult to use. I wanted to try a welding…
MeatBag PnP - Simple Pick-n-Place
Have you ever hand-built a PCB prototype with lots of parts? If so you'll know the annoyance of hand-building something from a big stack of Digi-Key…
A Low-Cost X-Y Scanner using 3D Printer
This summer, our summer intern Greg d'Eon made a quick project to build a X-Y Scanner from a 3D printer (by 'quick', I mean it took him less than 2…
Making a USB-HID Keyboard Encoder Board for PicoScope
Ever wanted to control something from a knobby-looking USB peripheral? In this example I wanted to control the PicoScope software from a bunch of…
Making a Simple Scope Probe Holder
Interested in a low-cost method of holding a scope probe securely against your PCB board? For this to work you'll need a scope probe with a…
Bed of Nails Test Bed
This is the final product, it can hold a PCB for testing without needing to have soldered any pins to it: And without the PCB mounted: I got parts…
High-Speed ADC with Variable Gain Amp Input
Here is an ongoing project: it’s a high-speed ADC combined with some nice input preprocessing (amplifier). It’s all controlled by a FPGA on the Avnet…
Compass Circles
In my effort to build the calibration software for my simple Digital Compass, I’ve been working on doing tests with it. Here is a screen-shot of the…
FIP is IPv6 Ready
File not found. FIP has passed IPv6 Ready Silver (Phase 1) testing when operating as a host device. Next up is the router test, then full Gold (Phase…
FIP - The Flexible IP(v6) Stack
I’m still working on finishing uploading & setting up documentation, but I’ve finally put some of a new IPv6 stack online. It’s designed to fit in a…